Flux-cored wire for ABRASION RESISTANT APPLICATIONS | ||||||
CARBO F-50 |
MF10-GF-50-G | C: 3 Si: 1,8 | C-, Cr-, Si-, Mn-alloyed flux cored wire on parts with which subjected | |||
Mn: 1,8 Cr: 15 | to abrasive wear and medium impact. | |||||
O | 50-54 HRC | Garbage shredder. | ||||
CARBO F-55 |
MF10-GF-60-GR | C: 4,8 Cr: 28 | The deposit has a high Cr-, C-alloyed stainless weld metal with exellent | |||
B: + | resistance to abrasion and medium impact. It can be used whenever high | |||||
55-59 HRC | abrasion is expected. Best results are achieved by welding in two layers. | |||||
O, S | Pumps, mixer parts, conveyer screws. | |||||
CARBO F-56 |
MF10-GF-60-G | C: 5 Si: 1,7 | It can be used whenever high abrasion is expected. Compared with CARBO | |||
Cr: 27 Mo: 1,3 | F-55, the weld deposit of this electrode has a higher temperatur resistance | |||||
O | 57-60 HRC | (up to 450°C). Best results are achieved by welding in two layers. | ||||
Pumps, mixer parts, conveyer screws. | ||||||
CARBO F-59 |
MF10-GF-60-GR | C: 5 Si: 1,5 | Tubular wire which deposits a high chrome carbide alloyed weld metal with | |||
Cr: 32 | exellent resistance to abrasion, corrosion and modarate impact.It can be used | |||||
O | 59-61 HRC | whenever high abrasion is expected. Best results are achieved by welding | ||||
in two layers. Pumps, impeller screws, track hopper. | ||||||
CARBO F-60 |
MF10-GF-60-G | C: 5,4 Si: 1,1 | High C-, Cr-, Nb-alloyed flux-cored wire electrode for high abrasive wear. | |||
Cr: 22 Nb: 7 | The weld deposit consists of chrome- and niobium-carbides. Weld metal is | |||||
O | 61-63 HRC | not machinable. Maximum deposit should be limited on three layers. | ||||
Steel, coal, cement and minaral industry. | ||||||
CARBO F-61 |
MF10-GF-65-G | C: 5,4 Cr: 22 | High C-, Cr-, Nb-alloyed flux-cored wire electrode with special carbides in | |||
Nb: 7 B: + |
extrem hardness. This combination results in high abrasion resistance. | |||||
O | 62-65 HRC | Applications are found in the hardfacing of mining equipment, augers, | ||||
impellers and dredgers. | ||||||
CARBO F-DURIT |
MF21-GF-55-CG | Fe-Matrix with | The weld metal is composed of fused tungsten carbides which are | |||
Matrix:47-52 HRC | Tungsten-Carbide | embedded in a hard matrix alloy.CARBO F-DURIT is easy to use and has little | ||||
G | Carbide:>2300 HV | (62%) | spatter and smoke. It schould be welded in max. 2 layers using lowest | |||
possible Amp and Volts. |
Osoba do kontaktu:
Paweł Obrusik – Kierownik sklepu/Specjalista spawalnik
tel. +48 32 294 80 39, wew. 30
kom. 663 122 998
e-mail: obrusik@harispal.pl